For the first time I am actually switching my main PC from Windows to Linux.
Problem: When booting into Fedora there was no display output, I changed it to safe graphics to install everything and that fixed it but after the install finished I tried turning it back off and there was still no display output
What I have already tried: I’ve tried installing drivers and everything I could find although that shouldn’t be the problem since I have an AMD 6700xt and Fedora comes with AMD drivers built in. I also tried Installing Linux Mint thinking maybe the distro was the problem but it came up with the same issue.
And if anyone suggests it no there is no way I am going to daily drive on safe graphics.
Edit: I am dual booting on a single 500gb ssd with windows already installed on the other half of the drive, not sure if that would be the problem. Also a similar problem was happening on windows if I left the screen in login for too long without signing in the display would show no signal and it wouldn’t wake up if I moved my mouse or clicked or pressed any keys.
amd ryzen 5 1600 cpu amd radeon 6700xt gpu 16gb ddr4 3200 ram 500gb wd blue sata ssd aoc 24g2 monitor
Could you try any other display to rule out things like EDID issues?
yeah I tried using another display and switching out the display cable didn’t help at all.
Try using Bazzite, it’s based on Fedora and it’s geared towards ease of use, it comes pre-configured with great defaults. That’s why I believe it might work for you. bazzite.gg
If that doesn’t work, make sure you’re plugging the cable to the GPU and that the GPU is set as main display output in the bios.
Bazzite has the same issue. Still no display output. And yes I’m sure my hdmi cable is plugged since it still works with safe graphics on and windows works perfectly with no issues.
Can you check if the iGPU works ?
its a amd ryzen 1600 it doesn’t have an igpu. Although I have a spare gtx 1660 I might try that.
If you try an Nvidia GPU, try it with the Bazzite Nvidia image.
Yeah so I tried my nvidia gtx 1660 and yeah everything worked perfectly first try.
Yeah I’ve seen this distro seams really good and my main use case is gaming. I will give it a go.
You should have absolutely no issues with that hardware on Fedora.
Could you try switching the display cable out? If that doesn’t work, try switching the cable to a different type (e.g. DisplayPort instead of HDMI or vice versa). If that also doesn’t work, try with a different display if you can.
Yep I switched out the cable and a different cable type and a different display didn’t help.
Hmm, that’s strange. Can’t think of much else that could prevent that system from displaying anything.
Since you mentioned safe graphics work, can you try enabling the automatic login for your user in GNOME/KDE so the login screen gets skipped?
If that doesn’t work: After booting in normal mode, wait a little bit until it should be at the login screen and then hit Ctrl + Alt + F6 a few times. Does a terminal appear on your screen?