Very new to self hosting and truenas.
Got an old dell with 6x4tb of storage. Turns out they are all SAS drives and turns out hardware raid is the old thing now. Knowing none of this before what can I do with SAS drives connecting to my raid card (in photo) knowing that this is just a home NAS, SAS drives are more expensive and better to just go SATA.
What do you think?
Get a pcie to data, sell all the SAS drives and save up for 6x4tb of Seagate data drives?
What would you do with a dell server with old SAS drives if the end goal was a dependable home NAS for important home files?
I’m new to this so any input helps, thanks!
Yes, if you’re going to run TrueNAS (or another solution based on ZFS) you should really get rid of the PERC and get an LSI SAS card in IT mode so that the system can see the raw disks.
When you start your SATA swap, either use the onboard SATA ports (if there are enough) or get a SATA card (more ports, probably slightly better performance than sharing the onboard controller) and start the process I described before.
Thanks for you help, I will try this. I will wait until my first SAS dies on noraidSAS card and then get a sata pcie and one by one move to sas