It’s actually far worse than that. Trailer park Millionaires is a report from 9 years ago following wealthy investors who were buying up trailer parks so they could Jack up rent. Investors specifically targeted sex offenders, convicted felons, and other desparate tennants, so they could mercilessly exploit them since they truly had no place else to go.

The investors were also trained to exploit families, since more members in the household means more potential workers, and that means they’ll be more likely to tolerate a rent hike.

Communication Workers of America is probably the closest to what you’re looking for. You’re definitely better off working with an established union instead of trying to build one from scratch, they have a lot of valuable experience and resources that you’ll need to pull off a unionization attempt. If you reach out directly to CWA, or any other union, they’ll work with you to help organize your workplace.

If you are serious about unionizing: first, see if you can get a few of your coworkers on-board by talking to them outside of work. Do this in-person or on voice calls that aren’t recorded, it’s crucial to keep the company unaware as long as possible so they have less time and ability to oppose you.

Unfortunately, generics can vary wildly in efficacy & quality. As @Aradina pointed out, sometimes the encapsulation is different (e.g. extended release coating vs. standard release), but also the form of the drug can differ (e.g. capsule, tablet, softgel, chewable, etc), chemical by-products from different manufacturing techniques may be present in different amounts, and different manufacturing processes can also yield different chiral enantiomer ratios in the end product.

The “same” drug from different manufacturers may vary in effectiveness / side-effects, and brand-name drugs aren’t always the best formulations for most patients.

When I install Linux for friends and family the only distro I use anymore is Fedora. I have used just about every major distro, and Fedora is the only one that has “just worked” on every computer I have tried it on.

Love them, or hate them, Red Hat is by far the single biggest company in the Linux community, and their Red Hat Enterprise Linux is renowned for being stable, performant, and very well supported. Fedora is where most of the updates that make their way into RHEL are initially available, so with Fedora you get a cutting edge distro with the backing and resources of a massive corporation that employs many of the top Linux-desktop contributors.

If you want a distro that “just works” I strongly recommend you give Fedora a try.

DietPi! It’s one the most resource efficient distros that is easy to set up. It’s ideal for single board computers and virtual machines, so I use it as a low-overhead Docker host on my Raspberry Pis. The dietpi-software tool installs optimized versions of most software you might use for SBC projects, but if it doesn’t have what you’re looking for, you can also use APT to install packages from the Debian ARM/ Raspbian repos.

I highly recommend Framework laptops for Linux. I have not used the Framework 16, but I can attest that Linux support for the Framework 13 (intel 11th & 12th gen) is excellent. I have used Fedora on the Intel 11th gen and Intel 12th gen, everything worked immediately on a fresh install without any workarounds or issues. Other distros might require a few package installs, but Fedora, Ubuntu, and Ubuntu derivatives should work out-of-the-box without any additional configuration. The Arch Wiki article for the Framework covers pretty much everything you might need to know to have an optimized Linux experience with any distro.

Aside from Framework’s excellent Linux support, I really have to stress how cool and unique it is as a laptop for developers and tinkerers. This thing is literally designed to be opened up, repaired, and modded. All of the internal components are clearly labeled and easily accessible, there’s even a little spot inside the laptop chassis just for spare screws in case a screw ever gets lost! Another awesome obscure feature of this laptop is the ability to use a Storage Expansion Card for dual booting. I just plug in the expansion card to boot into Windows, then unplug it and I’m back in Linux. It is absolute bliss compared to Windows and Linux sharing a bootloader.

I know I’m rambling, but I really could keep going on and on about Frameworks. They truly are unlike any other laptop, in all the right ways.

deleted by creator

I avoid Ubuntu because Canonical has a history of going their own way alone rather than collaborating on universal standards. For instance, when the X devs decided the successor to X11 needed to be a complete redesign from scratch companies like RedHat, Collabora, Intel, Google, Samsung, and more collaborated to build Wayland. However, Canonical announced Mir, and they went their own way alone.

When Gnome3 came out it was very controversial and this spawned alternatives such as Cinnamin, MATE, and Ubuntu’s Unity desktop. Unity was the only Linux desktop, before or since, to include sponsored bloatware apps installed by default, and it also sold user search history to advertisers.

Then, there’s snap. While Flatpak matured and becoame the defacto standard distro-agnostic package system, Canonical once again went their own way alone by creating snap.

I’m not an expert on Ubuntu or the Linux community, I’ve just been around long enough to see Canonical stir up controversy over and over by going left when everyone else goes right, failing after a few years, and wasting thousands of worker hours in the process.

I worked at a sandwich shop and had given my two weeks notice a few days earlier. My manager came to me and asked me to clean up the bathroom…alright. I could smell it before I even opened the door.

I told my manager I’d clean it if he’d still give me the employee discount after I was gone. “Done”. That’s when I knew it was really bad.

When I opened the door I discovered someone had ass-blasted the bathroom. I’m not talking about blowing up the toilet, they did that too, but they had dropped their drawers and point-blank diarhea shotgunned the pipes under the sink.

My manager didn’t honor the employee discount after I was gone, either.

Karl Marx was a philosopher and economist. He wanted to understand class relations and social conflict, so he developed theories to explain why things are the way they are. A Marxist uses Marx’s theories to understand why the world is the way it is.

Marx had a lot of theories, such as historical materialism - that all history was primarily motivated by socio-economic forces, not supernatural forces or grand conspiracy. Marx wrote that the dominate socio-economic system running the world in his time was capitalism/imperialism which fueled capital accumulation through exploitation and alienation, and used technology to further this process with imperialist wars for resources etc… He also focused on class struggle between those with the most resources, and those with the fewest resources - the bourgeoisie (capitalists) vs. the proletariat (workers/peasants).

Marx went further than trying to explain why the world is the way it is, he also theorized on how humanity could replace the dominate socio-economic system, and what a non-exploitative non-alienating socio-economic system might look like. “Marxist” refers to anyone who believes Marx’s theories are valid and uses them to understand the way things are.

Gnome provides a more consistent user experience because Gnome apps usually have fewer features and don’t offer many customization options by default. KDE apps usually have a lot of settings and customization options, but the user interface might be a little less intuitive or you may have to search in a settings menu to find what you’re looking for.

In my experience Gnome is pretty, intuitive, and well integrated, but I tend to settle on KDE Plasma because KDE apps often have more advanced functionality and more options for configuration. If you’re the type who likes to explore device/app settings to configure things exactly how you want, then consider KDE Plasma. If you’d rather have a minimal but consistent experience out-of-the-box without any tinkering then Gnome is probably the better choice for you.

deleted by creator

Take a look at OpenSCAD for modeling, if you have any programming/webdev experience you’ll be making simple parts in <5min. It’s the best for making & sharing designs that are easy to modify. Just yesterday I was going to print a phone stand that was a little too narrow, and by changing a single number variable it fit perfectly.

The immutable Fedora releases, like Kinoite, have been the best development distros for me. Immutable Fedora releases come with Toolbox for making per-project containers, so you can have separate de-cluttered dev environments for each project. Toolbox containers are not isolated environments like virtual machines, so performance is on-par with bare-metal as well.

I don’t know if Sliverblue or Kinoite is the right choice for your exact workflow, but if you’re looking for a Linux host that “just works” out of the box, has a trivial learning curve, and provides serious quality of life improvements then definitely look into Fedora Kinoite.

I haven’t played in over a year, but I really spent some hours in Veloren the last time I picked it up!

+1 for the Framework laptop from https://frame.work/ . It’s my favorite laptop I’ve ever owned and the Linux support is excellent. There’s a healthy Linux community surrounding this laptop and the Arch wiki even has an entire aricle dedicated to it.

I know your struggle. It’s not uncommon to experience issues with the Windows installer if the install medium is not created using Microsoft’s official Windows installation media creation tool (Use the middle option to download mediacreationtool.exe).

Coming from Linux, I tried writing the Windows .iso directly to a USB drive using dd, this absolutely would not work on any machine for me. Sometimes the install medium would boot, sometimes it wouldn’t, but even if it did the installer wouldn’t recognize any storage mediums or would fail part way through installing. Using the official media creation tool resolved all the issues I was having.

I do not know why the Windows .iso images do not work on any of my machines, but it sounds like you are experiencing the same issues that I was. Give the official media creation tool a try, hopefully that resolves the issue.

The 9to5 article is poorly written. In the first paragraph 9to5 says a new window system is “scheduled to replace” the current one, but this is not true. The cited blog post explicitly says “There’s no timeline or roadmap at this stage”. The Gnome developers are merely experimenting with a new window management system and at this early stage it’s impossible to know what the finished product may look like if these experiments go anywhere at all.

Here’s a link to the original blog post where Gnome developer Tobias Bernard explains their dissatisfaction with existing window management systems and discusses the techinical challeneges developers face.

Police spend most of their time on routine traffic stops, and routine traffic stops could be eliminated by transit and walkable infrastructure. It’s almost like it’s a racket…

Just chiming in to reaffirm what everyone else has said: KDE Neon is specifically built be the best KDE distro. The development branch is what KDE devs use to build & test all their software, so no distro is designed to work better with KDE software than KDE Neon.