"Set for a year-end release, AV2 is not only an upgrade to the widely adopted AV1 but also a foundational piece of AOMedia’s future tech stack.
AV2, a generation leap in open video coding and the answer to the world’s growing streaming demands, delivers significantly better compression performance than AV1. AV2 provides enhanced support for AR/VR applications, split-screen delivery of multiple programs, improved handling of screen content, and an ability to operate over a wider visual quality range. AV2 marks a milestone on the path to an open, innovative future of media experiences."
You must log in or register to comment.
AV1 was mid. Extremely slow encoding and minor performance gains over H265. And no good encoders on release.
H266 was miles ahead but that is propriatary like 265. So win some lose some.
Compression and efficiency is often a trade-off. H266 is also much slower than AV1, under same conditions. Hopefully there will come more AV1 hw encoders to speed things up… but at least the AV1 decoders are already relatively common.
Also, the gap between h265 and AV1 is higher than between AV1 and h266. So I’d argue it’s the other way around. AV1 is reported to be capable of ~30-50% bitrate savings over h.265 at the cost of speed. H266 differences with AV1 are minor, it’s reported to get a similar range, but more balanced towards the 50% side and at the cost of even lower speed. I’d say once AV1 encoding hardware is more common and the higher presets for AV1 become viable it’d be a good balance for most cases.
The thing is that h26x has a consortium of corporations behind with connections and an interest to ensure they can cash in on their investment, so they get a lot of traction to get hw out.
I can’t wait to possibly buy a card a decade from now with AV2 hardware decoding. Ain’t happening until after 2035 that’s for sure.
If we’re lucky some firmware upgrade or driver can make AV1 hardware decoding capable cards able to do AV2 as well, but I seriously doubt it - GPU manufacturers want to sell new cards all the time after all.maybe, maybe not.
when h264 was introduced (Aug 2004), even intel had HW encoding for it with sandybridge in 2011. nvidia had at 2012
so less than 7 years.
av1 was first introduced 7 years ago and for at least two years android TVs require HW decoding for it.
And AMD rdna2 had the same 4 years ago.
so from introduction to hardware decoding it took 3 years.
I have no idea why 10 years is thrown around.
and av1 had to compete with h264 and h265 both. ( they had to decide if it was worth implementing it)
So… a lot more people now have :
- 4G/5G on the go and proper broadband at home and office and even in unique location (sadly via MuskSat for now…) other ways to get data
- very capable devices in mobile phones, (mostly Android) clients e.g. video projector or dongles, of course computers
- human eyes… that can’t really appreciate 4K on average
… so obviously we should NOT stop looking for more efficient ways and new usages but I’m also betting that we are basically reaching diminishing return already. I don’t think a lot of people care anymore about much high screen resolution or frequency for typical video streaming. Because that’s the most popular usage I imagine everything else, e.g XR, becomes relative to it niche and thus has a hard time benefiting as much from the growth in performances we had until now.
TL;DR: OK cool but aren’t we already flattening the curve on the most popular need anyway?
It’s not for the end user at this point, it’s for YouTube/streaming companies to spend less on bandwidth at existing resolutions. Even a 5% decrease in size for similar quality could save millions in bandwidth costs over a year for YouTube or Netflix.
This! Also there’s AI upscaling, if good enough it could (in theory) make a 1080p video show with a 4k quality only very few lucky and healthy young people would be able to tell apart. In the meantime, my eyesight progressively gets worse with age.
We only just got hardware support for AV1 and they are already coming out with a new codec?
Are you saying you want people to stop researching better, more efficient ways to encode audio and video?
This is always the case, can’t stop development or the delays will get longer
God damn it, not again
Another codec, that will take a decade to get widespread adoption and hardware compatability. /sigh
And which will be so resource intensive to encode with compared to existing standards that it’ll probably take 14 years before home media collectors (or yar har types) are able and willing to use it over HEVC and AV1. :\
As an example AV1 encodes to this day are extremely rare in the p2p scene. Most groups still work with h264 or h265 even those focusing specifically on reducing sizes while maintaining quality. By contrast HEVC had significant uptake within 3-4 years of its release in the p2p scene (we’re on year 7 for AV1).
These greedy, race to the bottom device-makers are still fighting AV1. With people keeping devices longer and not upgrading as much as well as tons of people relying on under-powered smart-TVs for watching (forcing streaming services to maintain older codecs like h264/h265 to keep those customers) means it’s going to take a depressingly long time to be anything but a web streaming phenomenon I fear.
To be fair, it’s also basically impossible to have extremely high quality AV1 video, which is what a lot of P2P groups strive for. A lot of effort has gone into trying to do so and results weren’t good enough compared to x264, so it’s been ignored. AV1 is great at compression efficiency, but it can’t make fully transparent encodes (i.e., indistinguishable from the source). It might be different with AV2, though again even if it’s possible it may be ignored because of compatibility instead; groups still use DTS-HD MA over the objectively superior FLAC codec for surround sound because of hardware compatibility to this day. (1.0/2.0 channels they use FLAC because players support that usually)
As for HEVC/x265, it too is not as good as x264 at very high quality encoding, so it’s also ignored when possible. Basically the breakdown is that 4k encoding uses x265 in order to store HDR and because the big block efficiency of x265 is good enough to compress further than the source material. x264 wouldn’t be used for 4k encoding even if it could store HDR because its compression efficiency is so bad at higher resolutions that to have any sort of quality encode it would end up bigger than the source material. Many people don’t even bother with 4k x265 encodes and just collect the full disc/remuxes instead, because they dislike x265’s encoder quality and don’t deem the size efficiency worth its picture quality impact (pretty picky people here, and I’m not really in that camp).
For 1080p, x265 is only used when you want to have HDR in a 1080p package, because again x265’s picture quality can’t match x264, but most people deem HDR a bigger advantage. x264 is still the tool of choice for non-HDR 1080p encodes, and that’s not a culture thing, that’s just a quality thing. When you get down into public P2P or random encoding groups it’s anything goes, and x265 1080p encodes get a lot more common because x265 efficiency is pretty great compared to x264, but the very top-end quality just can’t match x264 in the hands of an experienced encoder, so those encoding groups only use x265 when they have to.
Edit: All that to say, we can’t entirely blame old-head culture or hardware compatibility for the unpopularity of newer formats. I think the home media collector usecase is actually a complete outlier in terms of what these formats are actually being developed for. WEB-DL content favors HEVC and AV1 because it’s very efficient and displays a “good enough” quality picture for their viewers. Physical Blu-Rays don’t have to worry about HDD space or bandwidth and just pump the bitrate insane on HEVC so that the picture quality looks great. For the record, VVC/x266 is already on the shortlist for being junk for the usecases described above (x266 is too new to fully judge), so I wouldn’t hold my breath for AV2 either. If you’re okay with non-transparency, I’d just stick with HEVC WEB-DLs or try to find good encoding groups that target a more opinionated quality:size ratio (some do actually use AV1!). Rules of thumb for WEB-DL quality are here, though it will always vary on a title-by-title basis.
Looking ahead, 53% of AOMedia members surveyed plan to adopt AV2 within 12 months upon its finalization later this year, with 88% expecting to implement it within the next two years.
From AOMedia website. So the plan is for it to have AV1 levels of adoption by 2028.
